Posts

ALL MUST GO!!

REDUCED!!! HOISTS TO SELL QUICKLY AT $3,500!!!

must go sale-page-001 (1)

 

Are you or do you know anyone looking for some new hoists for their garage or workshop?? If so, we have 2 x 5 & 1/2 tonne 4 post hoists for sale! Going cheap at $3,500 ONO, you wont want to miss out on this deal!

If you are interested, dont hesitate to contact us at the workshop on (07) 3343 5899 or emailing us on info@ssch.com.au

New Ultrasonic Cleaning Technology

Over the Christmas break we were spoilt here at Southside Cylinder Heads as we too received Christmas presents! We were lucky enough to get a BRAND NEW ULTRASONIC CLEANING MACHINE!

This machine has enough power to clean even the most stubborn Carbon build ups on Diesel and Petrol Cylinder heads/Blocks/Rocker gears and Timing cases.  Especially handy for late model turbo diesel inlet manifolds, which tend to become heavily carboned up and nearly totally blocked  resulting in loss in power and increased fuel consumption.  Dont forget we have a pick and delivery service available 🙂

file-page1

Trade Customer Rewards!!!!

have-a-drinkGive us a call to find out how you can have a drink on us this Easter long weekend.  Southside Cylinder Heads, Engine Reconditioning Australia is Queensland and Brisbane’s best for Cylinder head repairs and full engine rebuilds.  

Minimum repairs, standard rebuilds and performance upgrades are all catered for. Easter promotional offer is only valid for trade customers

first-choice-logo

All About Cylinder Head Hardness

With the advancement in engine technology more components than ever before are being manufactured out of aluminium.  The 70’s and 80’s seen the introduction of aluminium cylinder heads into mainstream family cars and now almost all new engines use aluminium heads and in many cases an aluminium engine block as well.

metal-hardness-tester-th-130-250x250-1

Southside Cylinder Heads
Digital Hardness Tester

Although both strong and light, aluminium is also a relatively soft metal that needs to be alloyed with another metal in order to have enough hardness to be used in an engine.  Typical alloying compounds are silicon manganese, copper manganese and iron.

When we talk about cylinder head hardness it is basically the ability of the component to resist being permanently deformed when a load is applied. Testing the hardness of your cylinder head is a vital part of the reconditioning process and the most widely used hardness test in the automotive field is Brinell Scale.

Depending on the manufacturing process and alloying metals used, cylinder heads will have different hardness levels from new, so for instance a new Mazda 6 cylinder head may be 125hb but a Toyota Corolla head may be only 110hb.  You would expect a new cylinder head to be in the vicinity of 100-130hb.

The only accurate way to test your cylinder head hardness is with a calibrated digital tester.  Our testing is conducted in 3 spots on the gasket face of each cylinder head and the average result is recorded.  Industry standard minimum hardness is 65hb and any heads with a reading below this level are unsuitable for reconditioning and must be replaced.  Unfortunately many workshops still use the outdated and unreliable manual “ball tester” that relies on a ball bearing in a tube to bounce above a line.  This type of tester is relatively cheap but has proven to be inaccurate in determining a cylinder heads suitability for reconditioning.

What causes the hardness level to deteriorate?

The single biggest factor that effects your cylinder head hardness is excessive heat.  Most modern engines operate at a temperature of approximately 88°c – 105°c.  When your engine overheats and exceeds its normal operating range, the increased heat puts major stresses on the aluminium cylinder head and starts to deteriorate the hardness value of the head.

Once the temperature of the aluminium reaches about 200°c – 250°c permanent softening of the alloy begins and the hotter and longer your engine is exposed to these conditions the more damage is done.  To minimise the damaging effects of overheating be sure to switch off your engine at the first signs of overheating and have your vehicle checked.

What will happen if I use a soft head?

Using a cylinder head that is soft (tested at 65hb or less) greatly increases the likelihood of premature head gasket failure as it has lost its structural integrity and ability to withstand load and stresses that occur during engine operation.  As well as gasket failure a soft head may also be more susceptible to warping and cracking as the weakened component continues to be subjected to the high loads and stresses of the combustion engine.

A key sign to look out for is head bolt recess or indentation caused when the load applied by the head bolts is too great for the soft aluminium and the bolts will start to sink into the head. These bolts pulling through the aluminium will prevent the correct load being applied to the head gasket and failure will be imminent.

If you have overheated your engine and suspect the cylinder head hardness may be affected, or you just want to be on the safe side, bring your head in to us and we can do a hardness test while you wait (in most cases), and best of all its free!

For more information on cylinder head hardness check out: http://www.aagaskets.com.au/PDF/CylinderHeadResearchInvestigation.pdf

 

 

Southside Cylinder Heads New Equipment

In the recent weeks, the team at Southside Cylinder Heads and Engine Reconditioning Australia have been able to upgrade and purchase two NEW and exciting pieces of equipment to further improve our already outstanding quality and service for you, our valued customers.

Warblaster Wet Media Blaster

We have now upgraded from our old dry blaster to a a brand new locally built wet media blaster, known as the “Warblaster”.southside_cylinder_heads_service_wet_media_blaster-400x300

Built right here in Brisbane, this will improve the finish and speed up the service times for all our Cylinder Heads and Engine Components.

The wet media blaster system propels a slurry of abrasive media and water against the work surface using a special  pump and compressed air, producing unique finishing capabilities and advantages such as eliminating dust, reduced media impingement, reduces stress on the components and produces a deep  clean on surfaces without chemicals.

CompAir L22 Air Compressor

We have also been lucky enough to purchase a new CompAir L22 variable speed screw air compressor.southside_cylinder_heads_service_air_compressor-320x200

The L22 is a variable speed compressor incorporating the very latest technological advances and manufacturing processes to provide users with a continuous supply of economic and reliable quality compressed air, thus improving turn around times on jobs meaning we can service our customers more efficiently.

Hopefully with this new technology we can also work towards offsetting the skyrocketing electricity bills we are all facing.

Southside Cylinder Heads, Engine Reconditioning Australia new Wet Media Blaster and Air Compressor will make the repairs and reconditioning of your cylinder heads and engine components quicker and improve efficiently and quality of our products. Please remember you can charge to your Capricorn account.

We can pick up and deliver anywhere from Brisbane and the Gold Coast suburbs, to the wider regions of Queensland and Northern New South Wales. We are a MTA and RACQ Approved Service Center.

A Basic Guide to Engine Valve Failure

Auto-Engine-Valves-320x200

Engine Valves

The valves in your cylinder head are a vital component of your engine and undergo enormous stresses, opening and closing up to 2500 times every minute under normal operating conditions. When one or more of these valves are damaged, the result can be anything from reduced power and poor fuel consumption, to complete engine failure.  The two most common types of valve failure are bent/broken valves and burnt valves.

Bent Valves

The most common failure of valves is bending or breaking as a result of contact with the pistons. The valves contacting the top of a piston is due to incorrect engine synchronization caused by timing chain/belt breakage and incorrect fitting of new belts and chains. If you suspect your engine may have bent or broken valves, it is crucial not to attempt to start the engine as this may result in more costly damage being caused to the cylinder head, pistons and cylinder bores.

The bent valves above are a result of a fatigued timing belt that has broken. Your timing belt doesn’t last forever and needs to be replaced according to the manufacturer’s service guidelines. Replacing your timing belt is cheap insurance against costly engine damage.

Burnt valvesValve-Piston-Diagram

The other common type of valve failure is valve burn, or burnt valves. Essentially this is caused by combustion gases escaping between the valve and valve seat when they are not sealing correctly. The hot combustion gases are forced past the valve which starts to burn away the edge of the valve, progressively getting worse the longer it is left without being rectified. Normally this type of failure affects the exhaust valves only, but it can also damage the intake valves.

A burnt valve will cause issues with your vehicle’s performance and fuel consumption. Rough idle, reduced power, backfiring, and misfire are all symptoms of valve burn. If your engine is showing symptoms like these, we recommend you get your car checked by a trusted mechanic, as continual driving with a burnt valve will cause more damage to your engine, and will in turn cost more to repair in the long run.


Possible causes of burnt valves are:

Bent-Valves-Caused-By-A-Broken-Timing-Belt-320x200

Bent valves caused by broken timing belt

  • Excessive localized heat
  • Combustion gases escaping past the valve and concentrated at only one point
  • Irregular valve sealing with cylinder head valve seat. Carbon residues generated by irregular combustion (poor mixture) will appear at the seat region and will jeopardize the sealing between the valve and its seat
  • Deficient refrigeration is another factor, due to partial obstruction of the cylinder head cooling.  As a consequence, the valve is cooled inadequately
  • Incorrect valve clearance can jeopardize the valve sealing and also cause this type of failure
  • Running a dry fuel such as L.P.G resulting in inadequate lubrication of the valve seat, causing the valv
    A-Valve-Starting-To-Burn4

    A Valve Starting To Burn

    e seat to fail and consequently, the valves

To help prevent this type of failure, there are a few things you can do. Maintain a clean, efficient cooling system so the engine does not run too hot,  use good quality fuels to help prevent carbon build up on the valve seats, and have your mechanic regularly check the valve clearances are within specifications.

If your vehicle is using an aftermarket L.P.G fuel system, you must check that the engine is L.P.G compatible (most are NOT). In the event your engine is running L.P.G but is not L.P.G compatible, valve failure is imminent. It will generally be less costly to have your cylinder head removed and modified for L.P.G before the valves start to burn, rather than wait until the damage is done. Once the L.P.G modifications are complete, it will be safe to use

Burnt-Exhaust-Valve5

Burnt Exhaust Valve

the L.P.G without damaging your engine.

The Damage That A Lack Of Servicing Can Cause

You may think that having your vehicle regularly serviced is not essential however the following situation that one of our customers found themselves in may cause you to reconsider!

Screenshot 2015-06-28 20.11.33

The piston rings are full of carbon deposits which caused low engine compression

The customer came to us earlier in the year wanting a service on his Hyundai Getz – it had done 51,000 kms & its last service was 30,000 kms ago. While carrying out the service we found that it had low compression due to the rings on the pistons being full of carbon deposits as highlighted in the picture below.

This damage was a direct result of the vehicle not having had an oil change in 30,000 kms. As a result, the engine had to be fully dismantled, cleaned and rectified costing the customer in excess of $4,000.00. Had more regular servicing been carried out on the vehicle this damage would not have occurred and the customer would only have been up for the cost of a service – a much less costly exercise!

Has it been a while since your last service? Even though you might not have experienced any repercussions yet it is most often the case that damage is already being done to your vehicle’s essential components. Don’t keep putting it off until it’s too late!

Brisbane's quality cylinder head service specialists

What to Expect from Southside Cylinder Heads

Brisbane’s Southside Cylinder Head Service offers world best practiceBrisbane's quality cylinder head service specialists and are one of Australia’s and Brisbane’s best choices for fast, reliable & quality workmanship. Our friendly and talented automotive technicians and engine builders are highly capable mechanics and have extensive experience in the reconditioning, repairing and diagnosis of cylinder heads from a wide range of engine types and take pride in their work.

 

SSCH Brisbane Aluminium Cylinder Head Specalist

Welcome to Southside Cylinder Head Services

Where we GUARANTEE a Hassle Free, Profitable and Risk Free solution to independent Automotive Mechanics who require Cylinder Head Repairs.

We are recognized by the automotive industry as having the most lucrative profit assistance program for mechanics.